33 - 43 GHz and 66 - 86 GHz VCO with high output power in an 80 GHz fT SiGe HBT technology
FakultätenFakultät für Ingenieurwissenschaften und Informatik
LizenzStandard (Fassung vom 01.10.2008)
This letter presents a signal generation circuit that combines a wide tuning range voltage controlled oscillator (VCO) and a frequency doubler. The VCO provides two differential outputs with different power levels. A push-push frequency doubler is designed and cascaded to the high power output of the VCO, while the low power output is reserved to drive a frequency divider in a PLL. The VCO can be tuned from 33 to 43 GHz, with around 0 dBm output power at the low power output. Simultaneously, signal generation from 66 to 86 GHz is achieved at the doubler output, with a maximum output power of - 1.1 dBm at 74 GHz (- 2.5 dBm at 81 GHz). The measured phase noise at the VCO output and the doubler output are - 91 dBc/Hz and - 83 dBc/Hz at 1 MHz offset (- 112 dBc/Hz and - 106 dBc/Hz at 10 MHz offset), respectively. The circuit is realized in a 0.8 µm SiGe heterojunction bipolar transistor process, with fT/fmax of 80/90 GHz. The VCO consumes 81 mA current while the doubler consumes an extra 17 mA from a 4 V supply. The circuit demonstrates the possibility of wide-band signal generation up to fmax with sufficient output power (e.g. to drive a mixer) in a conservatively scaled, low-cost process.
Erstellung / Fertigstellung
OriginalpublikationIEEE microwave and wireless components letters 20 (2010), S. 557 - 559
Normierte SchlagwörterHeterobipolartransistor [GND]
Frequency multipliers [LCSH]