Josephson-photonics devices as stable sources and detectors for microwave photons

Abstract

At its heart, a Josephson-photonics device combines macroscopic superconducting electronics and microscopic quantum optics. It consists of a dc-voltage biased Josephson junction that is connected in series to one or a few microwave cavities. Cooper pairs can tunnel incoherently across the junction by depositing their energy 2eVdc in the microwave cavities, creating photonic excitations in them. Many parameters, such as the eigenfrequencies ∝ (LC)^(−1/2) or zero-point fluctuations ∝ (L/C)^(1/4) of the microwave cavities, can be experimentally designed; other parameters, such as the strength of the Josephson nonlinearity and the dc voltage are easily modified in situ. In this way, Josephson-photonics devices constitute a versatile source of microwave photons with a wide variety of features extending from the classical to the deep quantum regime. To make them of use for quantum technological applications that rely on a well-defined phase of the microwave light, a crucial drawback must be overcome. The dc voltage does not provide a stable reference phase to Josephson-photonics devices, as it is subject to experimental noise, such that all phase information is lost. In this thesis, we develop the field of Josephson photonics in two directions: As first main result, we resolve the issue of phase instability in Josephson photonics. The phase can be stabilized either by injection locking to a small external signal with a stable and well-defined reference phase or by mutual synchronization to a second device. An alternative approach mitigates the issue for some use cases by optimizing an ansatz to reconstruct the undiffused stationary quantum state from experiments with phase diffusion. Secondly, we show how Josephson-photonics devices can be used for the challenging task of reliably detecting single itinerant microwave photons. The “Inelastic Cooper Pair Tunneling Photon Multiplier” exploits a resonance condition, where the energy provided by the dc voltage enables a multiplication process from one incoming to n outgoing photons. This process can be staged to reach a large number of outgoing photons. Here, we model itinerant Gaussian single-photon pulses of length T with Mølmer’s approach. Further, we define a detection scheme based on heterodyne quadrature measurement of the output signal. Most importantly, we show that realistic devices can achieve a detection efficiency of 84.5% with a small dark-count rate of 10^(−3)/T, promising to outperform competing schemes.