A direct fuel-cell-based hybrid system for airborne applications

Loading...
Thumbnail Image

Date

2024-12-19

Authors

Willich, Caroline

Journal Title

Journal ISSN

Volume Title

Publication Type

Habilitationsschrift

Published in

Abstract

The work presented in this book concerns the development of a direct hybrid based on a fuel cell and a battery. It examines its behaviour under different operating conditions and various other relevant aspects for its application as a power train for an electric aircraft. At first the fundamentals of fuel cells and batteries are explained on cell as well as on system level and different fuel cell and battery types are introduced. For both technologies the pressure dependency of the respective technology is addressed. The next section introduces the concept of hybridisation in general as well as various possible architectures. The concept of the direct hybrid and its characteristic performance and current-voltage relationship is explained. The next chapters then examine the influence that hybrid ratio, battery state of charge as well as the operation at low ambient pressure have on the current-voltage characteristics of the direct hybrid. A newly developed power management module is presented next, that enables to control the direct hybrid by choosing operating modes in which the power required for propulsion either comes from the fuel cell, the battery, or both at the same time when working together as a hybrid. When switching from one mode to the other certain limitations and procedures for transitioning from one mode to the other must be defined and observed during operation, which is explained in a separate chapter. The examined dependencies of the hybrid behaviour have to be considered when determining the size of the fuel cell and battery for the power requirement of a given flight profile. A method for optimising the sizes of both the fuel cell and the battery is presented in chapter 4.5, which takes into account the impact of fuel cell and battery behaviour that were examined in the previous chapters. The second part of the book introduces the concept of pressurising the fuel cell at high altitudes, to mitigate the lower power output from the fuel cell at low ambient pressures. Possible compression technologies are compared and assessed for their suitability for the target application. Since electrical turbo-compressors currently show the highest potential for the application their functioning principle and characteristics are explained in more detail. Since the output pressure of turbo-compressors varies with the inlet conditions (temperature and pressure), the performance of a Rotrex EK10AA compressor at low inlet pressures and varying temperature is examined in detail and the influence of low inlet pressures on a power limit that is imposed by the inverter of the electric motor driving the compressor is described. When pressurising a fuel cell its power output increases, but the energy required for compression in an electrical turbocharger increases almost linearly with its pressure ratio. Therefore, the optimum pressure, above which a further increase in pressurisation does not provide any additional benefit and would only make the system larger and heavier, is examined, as well as the influence of altitude (low inlet pressures) and pressure losses on this value. When combining a fuel cell and an electric turbo-compressor the dynamic control of the system is also a challenge. To ensure a stable and safe operation, instable operating conditions, like compressor surge, must be avoided and a strategy for surge avoidance is introduced. At the end an outlook for further research challenges and opportunities is given.

Description

Faculties

Fakultät für Ingenieurwissenschaften, Informatik und Psychologie

Institutions

Institut für Energiewandlung und -speicherung

Citation

DFG Project uulm

EU Project THU

Other projects THU

License

CC BY 4.0 International

Is version of

Has version

Supplement to

Supplemented by

Has erratum

Erratum to

Has Part

Influence of Low Pressures on the Performance of Lithium Ion Batteries for Airplane Applications, P. Hoenicke, R. Khatri, C. Bauer, M. Osama, J. Kallo, C. Willich, Journal of The Electrochemical Society, 2023. - https://doi.org/10.1149/1945-7111/acdd1e
45 4.1.1 Investigation of a fuel cell hybrid system with a new modular test bench approach for all electric hybrid power train systems, T. Graf, R. Fonk, J. Schröter, P. Hoenicke, C. Bauer, J. Kallo, C. Willich, Journal of Energy Storage, Volume 56, Part B, 2022. - https://doi.org/10.1016/j.est.2022.105999
Low pressure influence on a direct fuel cell battery hybrid system for aviation, T. Graf, R. Fonk, S. Paessler, C. Bauer, J. Kallo, and C. Willich, Int J Hydrogen Energy, Sep. 2023. - https://doi.org/10.1016/j.ijhydene.2023.09.003
Power management control and delivery module for a hybrid electric aircraft using fuel cell and battery, P. Hoenicke, D. Ghosh, A. Muhandes, S. Bhattacharya, C. Bauer, J. Kallo, and C. Willich, in Energy Conversion and Management, vol. 244, p. 114445, 2021. - https://doi.org/10.1016/j.enconman.2021.114445
Switching Logic for a Direct Hybrid-Electric Powertrain, R. Fonk, T. Graf, S. Paeßler, C. Bauer, J. Kallo and C. Willich, Aerospace, vol. 11, no. 1, 2024. - https://doi.org/10.3390/aerospace11010071
“Optimal Sizing of Fuel Cell and Battery in a Direct-Hybrid for Electric Aircraft,” T. Graf, R. Fonk, C. Bauer, J. Kallo, and C. Willich Aerospace, vol. 11, Feb. 2024. - https://doi.org/10.3390/aerospace11030176
Influence of Low Inlet Pressure and Temperature on the Compressor Map Limits of Electrical Turbo Chargers for Airborne Fuel Cell Applications, J. Schröter, D. Frank, V. Radke, C. Bauer, J. Kallo, and C. Willich, Energies, vol. 15, no. 8, Apr. 2022. - https://doi.org/10.3390/en15082896
J. Schröter, T. Graf, D. Frank, C. Bauer, J. Kallo, and C. Willich, “Influence of pressure losses on compressor performance in a pressurized fuel cell air supply system for airplane applications,” Int J Hydrogen Energy, vol. 46, no. 40, pp. 21151–21159, 2021. - https://doi.org/10.1016/j.ijhydene.2021.03.218
“Development of a control strategy for an air supply module for pressurizing fuel cells in airborne applications”, D. Frank, J. Schröter, C. Bauer, and C. Willich, Int J Hydrogen Energy, 2023. - https://doi.org/10.1016/j.ijhydene.2023.05.204

Part of

DOI external

DOI external

Institutions

Periodical

Degree Program

DFG Project THU

item.page.thu.projectEU

item.page.thu.projectOther

Series

Keywords

Fuel cell hybrid, Aviation, Direct hybrid, Brennstoffzelle, Fuel cells, DDC 620 / Engineering & allied operations